Paint menu list – Sony Ericsson PDW-530P User Manual
Page 146
A
ppen
dix
es
146
Menu List
PAINT Menu List
The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No.
Page
Item
Settings
Default
Description
01
SW STATUS
GAMMA
OFF/ON
ON
Turns the gamma correction on or off.
CHROMA
OFF/ON
ON
Turns the chroma of the composite signal on
or off.
MATRIX
OFF/ON
OFF
Turns the linear matrix correction on or off.
KNEE
OFF/ON
ON
Turns the knee correction on or off.
WHITE CLIP
OFF/ON
ON
Turns the white clipping correction on or off.
DETAIL
OFF/ON
ON
Turns the detail signal on or off.
APERTURE
OFF/ON
ON
Turns the aperture function on or off.
FLARE
ON/OFF
ON
Turns the flare function on or off.
EVS
OFF/ON
OFF
Turns the EVS shutter on or off.
TEST SAW
OFF/REC/SAW
OFF
Selects the test signal.
02
WHITE
COLOR TEMP <A>
Color
temperature
values
3200
Sets the temperature of WHITE A.
COLOR FINE <A>
(–99 to +99)
0
Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <A>
(–99 to +99)
0
Only the value of R GAIN is changed.
B GAIN <A>
(–99 to +99)
0
Only the value of B GAIN is changed.
D5600 <A>
OFF/ON
OFF
Turns the WHITE A electronic 5600K filter on
or off.
COLOR TEMP <B>
Color
temperature
values
0
Sets the temperature of WHITE B.
COLOR FINE <B>
(–99 to +99)
0
Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
R GAIN <B>
(–99 to +99)
0
Only the value of R GAIN is changed.
D5600 <B>
OFF/ON
OFF
Turns the WHITE B electronic 5600K filter on
or off.
03
BLACK/FLARE
MASTER BLACK
(–99 to +99)
0
Adjusts the master black level.
R BLACK
(–99 to +99)
0
Adjusts the R black level.
B BLACK
(–99 to +99)
0
Adjusts the B black level.
MASTER FLARE
(–99 to +99)
0
Adjusts the flare level of the master.
R FLARE
(–99 to +99)
0
Adjusts the R flare level.
G FLARE
(–99 to +99)
0
Adjusts the G flare level.
B FLARE
(–99 to +99)
0
Adjusts the B flare level.
FLARE
OFF/ON
ON
Turns the flare correction circuit on or off.
TEST OUT SELECT
ENC/R/G/B
ENC
Selects the output signal of TEST OUT
connector.