Sony Ericsson PDW-530P - Manual (Page 19)

C
h
apt
er 1
O
v
er
v
ie
w
19
1-2 Example of System Configuration
1-2 Example of System Configuration
The diagram below shows a typical configuration of the
camcorder for ENG and EFP. For more information about the fittings, connections, or
use of additional equipment and accessories, see Chapter
8 as well as the operation manuals for the connected
equipment.
“Memory Stick”
(see page 161.)
RM-B150/B750 Remote
Control Unit
Video monitor for color image
check during shooting
Extension board
2) For PDW-510/530 only
Name / Purpose Part No.
SDI Output Board CBK-SD01
Composite Input Board CBK-SC01
Pull Down Board
CBK-FC01 2)
Viewfinder-related equipment
Name / Purpose Magnification Part No.
Fog-proof filter – 1-547-341-11
Lens assembly –2.8 D to +2.0 D A-8262-537-A
Lens assembly –3.6 D to –0.8 D A-8262-538-A
Lens assembly –3.6 D to +0.4 D A-8267-737-A
Lens assembly
(3
× magnification)
–2.4 D to +0.5 D A-8314-798-A
AC power suppl y
Battery
1) BP-L40/M50 cannot be used.
Name / Purpose Part No.
AC Adaptor AC-550/550CE
AC Adaptor AC-DN2B
Name / Purpose Part No.
Battery Charger BC-M150/M50
Battery Pack
1) BP-IL75/GL95/
M100
Camera adaptor
Name / Purpose Part No.
The input of the audio
channels 3/4 and the
SDI output CA-701
CCZ (26-pin) output/
analog composite/SDI
input CA-702/702P
Connection through i.LINK interface
Devices with a DV connector (DSR-DU1 etc.)
Audio signal source
External microphone ECM-672 or similar
microphone
CAC-12 Microphone Holder
Audio equipment
WRR-862 UHF Portable Tuner
WRR-855 series UHF Synthesized Tuner Unit
CCXA-53 audio cable
DMX-P01 Portable Digital Mixer
XLR 5-pin connector for stereo
microphone (service part)