Maintenance menu list – Sony Ericsson PDW-530P User Manual
Page 150
A
ppen
dix
es
150
Menu List
MAINTENANCE Menu List
The following table lists and describes the items in the
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No.
Page
Item
Settings
Default
Description
01
WHT SHADING
SHADING CH SEL
R/G/B/TEST
R
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
R/G/B WHT H SAW
(–99 to +99)
0
H Saw white shading compensation
R/G/B WHT H PARA (–99 to +99)
0
H Parabola white shading compensation
R/G/B WHT V SAW
(–99 to +99)
0
V Saw white shading compensation
R/G/B WHT V PARA (–99 to +99)
0
V Parabola white shading compensation
WHITE SAW/PARA
OFF/ON
0
Turns white shading Saw and Parabola
compensation on and off.
02
BLK SHADING
SHADING CH SEL
R/G/B/TEST
R
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
R/G/B BLK H SAW
(–99 to +99)
0
H Saw black shading compensation
R/G/B BLK H PARA
(–99 to +99)
0
H Parabola black shading compensation
R/G/B BLK V SAW
(–99 to +99)
0
V Saw black shading compensation
R/G/B BLK V PARA
(–99 to +99)
0
V Parabola black shading compensation
BLACK SAW/PARA
OFF/ON
ON
Turns black shading Saw and Parabola
compensation on and off.
MASTER BLACK
(–99 to +99)
0
Master black level adjustment
MASTER
GAIN(TMP)
–3/0/3/6/9/12/18/
24/30/36/42/48 dB
0 db
Temporarily adjusts the master gain value.
03
LEVEL ADJ
ENC VIDEO LEVEL (–99 to +99)
0
Encoder video level adjustment
RGB LEVEL
(–99 to +99)
0
R/G/B video level adjustment
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
H BLANKING
WIDTH
(–99 to +99)
0
H blanking width adjustment