Sony Ericsson PDW-530P - Manual (Page 23)

23
2-1 Power Supply
Chapter
2
Locations and Functions
of Parts and Controls
2-1 Power Supply
a Battery attachment
Attach a BP-IL75/GL95/M100 battery pack.
Furthermore, by attaching an AC-DN2B AC Adaptor, you
can operate the camcorder from AC power.
Note
If you mount other than the recommended battery pack in
the camcorder, the operation may be unstable when
starting or ending recording or playback.
b DC IN connector (XLR type, 4-pin, male)
To operate the camcorder using an AC power supply,
connect an AC-550/550CE AC Adaptor with the DC
output cable supplied with the adaptor.
c POWER switch
This switch turns the main power supply on and off.
d LIGHT switch
This determines how a video light connected to the LIGHT
connector is turned on and off.
AUTO: When the switch on the video light is in the on
position, putting the camcorder in recording mode
turns the video light on automatically. When using the
auto interval recording mode, the video light is
automatically turned on immediately before recording
starts.
MANUAL: You can turn the video light on or off
manually, using its own switch.
Note
If you use other than the recommended battery pack in the
camcorder, the video light may not operate.
3 POWER switch
4 LIGHT switch
2 DC IN connector
1 Battery attachment