Sony Ericsson PDW-530P User Manual
Page 154
A
ppen
dix
es
154
Menu List
08
TIMECODE
TC OUT
AUTO/GENE
AUTO
Selects the time code signal output.
AUTO: Outputs the time code generator
output during recording and outputs the
time code reader output during playback.
GENE: Outputs the time code generator
output during recording and playback.
DF/NDF
(PDW-510/530 only)
DF/NDF
DF
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non drop frame mode
EXT-LK DF/NDF
(PDW-510/530 only)
INT/EXT
INT
Selects either internal setting or external
setting for DF/NDF.
INT: Internal
EXT: External
EXT-LK UBIT
INT/EXT
INT
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the time
code is locked to an external source.
INT: Internal lock
EXT: External lock
LTC UBIT
FIX/TIME
FIX
Sets the data to be recorded in UBIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
VITC UBIT
FIX/TIME
FIX
Sets the data to be recorded in UBIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
WATCH AUTO ADJ
OFF/ON
ON
Matches the time of the built-in clock with the
time data of the user bits of an external time
code. Turns the automatic time correction
function of the built-in clock on or off .
UBIT GROUP ID
000/101
000
Selects the UBIT GROUP ID.
VITC INS LINE 1
12 to 19 H (PDW-
510/530)
16H
Selects the line into which VITC is to be
inserted.
9 to 22 H (PDW-
510P/530P)
19h
VITC INS LINE 2
12 to 19 H (PDW-
510/530)
18h
Selects the line into which VITC is to be
inserted.
9 to 22 H (PDW-
510P/530P)
21H
09
VDR MODE
REC TALLY BLINK
OFF/ON
ON
Turns the tally illumination control on or off in
the event of BATTERY BEFORE END/DISC
BEFORE END.
REC START/BEEP
OFF/ON
OFF
Turns on or off the alarm sound at REC
START/STOP.
SUB LCD MODE
SEL
TIMER/OFF/CONT
TIMER
Sets the time code (TC) display after power-
off as follows.
TIMER: The TC display turns off after the
elapse of the time set by the TIMER SET
below.
OFF: Not displayed.
CONT: Displayed.
SUB LCD TIMER
1H/3H/8H
1H
Sets the duration of time after which the TC
display is to be turned off after power-off,
when the MODE SELECT item, above, is set
to TIMER (H: hours).
REC FORMAT
(PDW-530/530P
only)
IMX50/IMX40/
IMX30/DVCAM
IMX50
Selects the type of video codec. Multiple
codecs cannot be mixed on one disc.
No.
Page
Item
Settings
Default
Description