Sony Ericsson PDW-530P - Manual (Page 92)

Chapt
er
6
Me
n
u
Dis
p
la
y
s
an
d
Det
a
iled
S
e
ttin
gs
92
6-2 Status Display on the Viewfinder Screen
OFF switch is set to OFF (when the cover of the menu
operating section is closed, OFF is automatically selected).
To disable display of the status
confirmation windows
Proceed as follows.
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the SET STATUS page
appears, and press the MENU knob to select the page.
You can set the following items on the SET STATUS
page.
3
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
display the selected window, then press the MENU
knob.
The z mark on the left of the selected item changes to
a
b mark and the ? mark on the left of the setting
changes to a z mark.
5
To continue setting other windows, repeat steps 3 and
4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
6-2-9 Confirming the Image of the
Return Video Signal in the
Viewfinder
You can set whether or not the image of the return video
signal input to the GENLOCK IN connector is displayed in
the viewfinder, using the GENLOCK page of the
MAINTENANCE menu.
Proceed as follows.
1
Set the MENU ON/OFF switch to ON while holding
down the MENU knob.
The TOP menu appears.
2
Turn the MENU knob to move the b mark to
“MAINTENANCE”, then press the MENU knob.
If this is the first time the MAINTENANCE menu has
been displayed, the CONTENTS page of the
MAINTENANCE menu appears. If the menu has been
used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the
b mark to “GENLOCK”, then press
the MENU knob to display the GENLOCK page.
If a different page is displayed, turn the MENU knob
until the GENLOCK page appears, then press the
MENU knob to select the page.
Item Description
ABNORMAL Selects whether or not the ABNORMAL
window is displayed (ON or OFF).
FUNCTION Selects whether or not the FUNCTION
window is displayed (ON or OFF).
STATUS AUDIO Selects whether or not the STATUS
AUDIO window is displayed (ON or
OFF).
By pushing the STATUS ON/SEL
/ OFF switch up to ON/SEL, the
confirmation window appears.
Each time you push this switch up
to ON/SEL, the window switches.
After 10 seconds, the window
disappears automatically.
To make the window disappear
promptly after displaying the
window, push this switch down
to OFF.
U13 SET STATUS
STATUS ABNORMAL : ON
STATUS FUNCTION : ON
STATUS AUDIO : ON