5-3 recording audio on channels 3 and 4, Selecting the recorded audio, Adjusting the audio recording levels – Sony Ericsson PDW-530P User Manual

Page 72

Advertising
background image

Cha

p

te

r 5

Ad

jus
tme
nt

s

an
d Set

tings
f

o

r Rec

o

rding

72

5-5 Adjusting the Audio Level

• The second top bar may turn on occasionally, but do

not allow the top bar to go on. If it goes on, the audio
level is too high.

Correspondence between recording level
adjustments and audio level controls
In the AUDIO-3 page of the MAINTENANCE menu, you
can select which audio level control controls the audio
recording level of the front microphone input. The
correspondence between the controls and the menu items
and settings is as follows.

Note

When you have operation of the MIC LEVEL control and
LEVEL (CH-1/CH-2) controls linked together, if the
LEVEL (CH-1/CH-2) controls are set to 0, the audio
signals on channels 1 and 2 cannot be recorded. Check the
position of the LEVEL (CH-1/CH-2) controls before
adjusting the MIC LEVEL control.

5-5-3 Recording Audio on Channels

3 and 4

Selecting the recorded audio

You can select the audio recorded on audio channels 3 and
4 with the AUDIO IN CH-3/CH-4 switches, or you can
have the selection made automatically, as follows.

To automatically select the same audio as on
channels 1 and 2
In the AUDIO-1 page of the MAINTENANCE menu, set
the AUDIO CH3/4 MODE item to “CH 1/2”.

Adjusting the audio recording levels

In the AUDIO-2 page of the MAINTENANCE menu, set
the AU CH34 AGC MODE item as follows.

For automatic adjustment: select “STREO” or

“MONO”.

For fixed settings: select “OFF”.

Note

The type of audio recorded on audio channels 3 and 4 does
not depend on the XLR connection automatic detection
function. It is determined only by the switch settings.

Audio signals to be recorded on audio channels 3 and 4

Level to be
adjusted

Control

Menu item

Setting

Channel-1
recording
level

MIC LEVEL control

MIC CH1
LEVEL

FRONT

LEVEL (CH-1) control
(on the left)

SIDE

LEVEL (CH-1) control
is linked with MIC
LEVEL control.

F+S1

Channel-2
recording
level

MIC LEVEL control

MIC CH2
LEVEL

FRONT

LEVEL (CH-2) control
(on the right)

SIDE2

LEVEL (CH-2) control
is linked with MIC
LEVEL control.

F+S1

F: The audio signal from the front microphone

is recorded.

R: The audio signal input to the AUDIO IN CH1

connector is recorded.

W: The audio signal of the wireless microphone

is recorded.

F: Same as with the CH3 switch.

R: The audio signal input to the AUDIO IN CH2

connector is recorded.

W: Same as with the CH3 switch.

Advertising
This manual is related to the following products: