SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 3)

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6014L-T. Instal-
lation and maintenance should be performed by experienced technicians only.
The SuperServer 6014L-T is a high-end dual processor rackmount server based
on the SC811LT-260 1U rackmount server chassis and the Super X6DLP-EG2
serverboard. The X6DLP-EG2 supports Intel ® Xeon ® LV or ULV processors in
479-pin PGA sockets.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the Super X6DLP-EG2 serverboard
and the SC811LT-260 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014L-T into a
rack and check out the server confi guration prior to powering up the system. If your
server was ordered without the processor and memory components, this chapter will
refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface