SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 51)

Chapter 5: Advanced Serverboard Setup
5-15
Universal Serial Bus
(USB0/1)
Two USB 2.0 ports are located beside
the LAN ports. USB0 is the bottom
port and USB1 is the top port. See the
table on the right for pin defi nitions.
Universal Serial Bus
Headers
Two extra USB headers designated
USB2/3 can be used for front side
USB access. You will need a USB
cable to use these connections. Re-
fer to the table on the right for pin
defi nitions.
Universal Serial Bus
Pin Defi nitions (USB0/1)
USB0
Pin # Defi nition USB1
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 N/A 5 Key
USB Headers
Pin Defi nitions (USB2/3)
USB2
Pin # Defi nition USB3
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 N/A 5 N/A
Fan Headers
There are six fan headers (Fan1 - Fan
6) on the X6DLP-EG2. Fan1 and Fan
2 are for the CPU fans and Fan3 to
Fan6 are system cooling fans. See
the table on the right for pin defi ni-
tions. Note: These fan headers are
4-pin fans. Pins 1-3 are backward
compatible with traditional 3-pin fans.
Please refer to "Health Monitoring" in
the BIOS Advanced Settings for fan
speed control settings.
Fan Header
Pin Defi nitions
(Fan1-5)
Pin# Defi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM_Control