SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 56)

5-20
S UPER S ERVER 6014L-T User's Manual
5-11 Onboard Indicators
JLAN LEDs
The Gigabit Ethernet LAN ports (located
beside the USB ports) each have two
LEDs. The right LED indicates activity
while the left LED may be green, am-
ber or off to indicate the speed of the
connection. See table at right for the
functions associated with the connec-
tion speed LED.
JLAN Left LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Alarm Reset
The system will notify you in the event of
a power supply failure. This feature as-
sumes that Supermicro redundant power
supply units are installed in the chassis.
If you only have a single power supply
installed, you should not connect any-
thing to this header (JPR1) to prevent
false alarms. See the table on the right
for jumper settings.
Alarm Reset
Jumper Settings
Jumper Setting Defi nition
Open Enabled
Closed Disabled
System Status LED
DS9 is an onboard indicator that informs
you of the system power status. Refer
to table on the right for information.
Please refer to Appendix A for more
information.
System Status LED Indicator
(DS9)
DS9 Defi nition
Green System: On, Normal
Amber System: Off, PWR Cable Connected
Red PWR or CPU Failure, CPU Overheat