Sherwood P-965 - Manual (Page 34)

ENGLISH
34
LISTENING TO RADIO BROADCASTS
Auto tuning
• Auto presetting function automatically searches for FM stations only and store them in the memory.
• While listening to radio broadcasts, press and hold down the (ENTER/)MEMORY button for more than 3 seconds.
• Then “ AUTO” appears on the display. The tuner
will now search until a station of sufficient strength
has been found. The display shows the tuned
frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• Then “AUTO” lights up and this unit starts auto
presetting.
• Up to 30 FM stations can be stored.
Notes:
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, perform
“Manual presetting” procedure with using “Manual
tuning” operation.
• When performing auto presetting with the remote
control, first be sure to turn off the OSD menu
display.
Auto presetting
• Manual tuning is useful when you already know the
frequency of the desired transmitter.
• Perform the steps ~ in “Auto tuning” procedure and
press the TUNING UP(+) or DOWN(-) button
repeatedly until the right frequency has been reached.
Manual tuning
• Each time this button is pressed, the band is changed
to FM or AM.
• When pressing the BAND button without selecting
the TUNER, the tuner will be selected automatically.
Select the tuner.
Press the TUNING UP(+) or DOWN(-) button for more than 0.5 second.
3
Select the desired band.
2
or
STANDBY POWER ON
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
BAND FREQUENCY
or
STANDBY POWER ON
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
+
or
STANDBY POWER ON
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
+
or
STANDBY POWER ON
AUD2
SCH,M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
1