Sherwood P-965 - Manual (Page 45)

45
ENGLISH
Repeat the above steps and until the speakers are all set to the desired mode.
4
Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the
ENTER button.
1
When selecting the SPEAKER DISTANCE
• Then “ ” and “ ” are moved to the unit mode. • Each time these buttons are pressed, “Meters” or
“Feet” is selected.
• Once a unit is selected, the distances are
automatically changed in the selected unit.
STANDBY POWER ON
MAIN PAGE FAV
MUTE
CH. SET VOL
RETURN
DISP
MI
OSD/MENU
1 STEREO
CH/ ADJUST
2 3
4 5 6
7 8 9
0 ENT
M2 M3
DSP DECODE DSP
STANDBY POWER ON
MAIN PAGE FAV
MUTE
CH. SET
VOL
RETURN
DISP
MI
OSD/MENU
1 STEREO
CH/ ADJUST
2 3
4 5 6
7 8 9
0 ENT
M2 M3
DSP DECODE DSP
RNC-510
Press the CURSOR UP( )/DOWN( )
buttons to select the unit.
2
Press the CURSOR LEFT( )/RIGHT( )
buttons to select the desired unit.
3
R E T U R N : B a c k , : S e l e c t
Feet
S P E A K E R D I S T A N C E
U N I T :
F L : 1 0 R : 1 0
F C : 1 0
S U R R . L : 1 0
S U R R . R : 1 0
B L : 1 0 R : 1 0
STANDBY POWER ON
MAIN PAGE FAV
MUTE
CH. SET VOL
RETURN
DISP
MI
OSD/MENU
1 STEREO
CH/ ADJUST
2 3
4 5 6
7 8 9
0 ENT
M2 M3
DSP DECODE DSP
RNC-510
Repeat the above steps and until the
distances are all entered.
6
Press the CURSOR LEFT( )/RIGHT( )
buttons to enter the distance from the
selected speaker to the listening position.
5
Press the CURSOR UP( )/DOWN( )
buttons to select the desired speaker.
4
• Then “ ” and “ ” are moved to its distance.
• You cannot select the subwoofer and the speakers
set to “None”.
• You can set the distance within the range of 0.3~9
meters in 0.3 meter intervals(or 1~30 feet in 1 feet
intervals)