Sherwood P-965 - Manual (Page 67)

PRE AMPLIFIER SECTION
Analog Audio
• Total harmonic distortion, output 1 V, 1 kHz | 0.05 %
• Intermodulation distortion
60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω, output 1 V | 0.09 %
• Input sensitivity/impedance, output 1 V
Phono (MM) | 2.5 mV/47 k Ω
Line (CD, TAPE MONITOR, VIDEO) | 200 mV/47 k Ω
• Signal to noise ratio, IHF “A” weighted
Phono (MM) | 72 dB
Line (CD, TAPE MONITOR, VIDEO) | 100 dB
• Frequency response
Phono (MM), RIAA, 30~20, 000Hz | 1.0 dB
LINE (CD, TAPE MONITOR, VIDEO), 10~100,000 Hz | +0, -3 dB
• Output level
TAPE MONITOR REC, 1 k
Ω
| 200 mV
PRE OUT(Front, Center, Surround, Surround back, Subwoofer), 1 k Ω | 1.0 V
• Bass/Treble control, 100 Hz/10 kHz | 10 dB
• Maximum output | 9 V
Digital Audio
• Sampling frequency | 32, 44.1, 48, 96, 192 kHz
• Digital input level
Coaxial, 75 Ω | 0.5 Vp-p
Optical, 660 nm | -15~-21 dBm
VIDEO SECTION
• Video format | NTSC
• Input sensitivity(=Output level), 75
Ω
Video(Composite (normal)) | 1 Vp-p
S-Video(luminance signal) | 1 Vp-p
(chrominance signal) | 0.286 Vp-p
Component video(R-Y signal) | 0.5 Vp-p
(B-Y signal) | 0.5 Vp-p
(Y signal) | 1.0 Vp-p
FM TUNER SECTION
• Tuning frequency range | 87.5~108 MHz
• Usable sensitivity, THD 3 %, S/N 30 dB | 17.2 dBf
• 50 dB quieting sensitivity, mono/stereo | 25.2/43.2 dBf
• Signal to noise ratio, 65 dBf, mono/stereo | 72/68 dB
• Total harmonic distortion, 65 dBf, 1 kHz, mono/stereo | 0.2/0.3 %
• Frequency response, 20 Hz~15 kHz |
1.5 dB
• Stereo separation, 1 kHz | 40 dB
• Capture ratio | 3.0 dB
• IF rejection ratio | 120 dB
AM TUNER SECTION
• Tuning frequency range | 520~1710 kHz
• Usable sensitivity | 12.5 mV
• Signal to noise ratio | 51 dB
• Selectivity | 30 dB
GENERAL
• Power supply | 120 V~60 Hz
• Power consumption | 50 W
• Switched AC outlets
| TOTAL 100 W, 1 A max.
• Dimensions(W H D) | 440 196 450 mm(17-3/8 7-3/4 17-3/4 inches)
• Weight(Net) | 12 kg(26.5 lbs)
Note: Design and specifications are subject to change without notice for improvements.
Specifications
67
ENGLISH