Sega WaveRunner GP - Manual (Page 119)

www.seuservice.com 110
70cm
FIG. 20. 1
20 - 2 CONNECTING THE COMMUNICATION CABLE
To enable the game machines to serve in a communication play, you must interconnect their
game boards with the communication cables (optical fiber cables).
For this wiring, prepare the parts described in Table 5c of Section 5 and a short Phillips
screwdriver for M4 screws.
Turn off power and disconnect the plug. Disconnect the power cord so as not to damage it.
Referring to Section 7, uncouple and align the machines keeping the workspace in front of the
Front Cabinet.
Remove the Service Lid on the upper front part of the Front Cabinet (see 18-1).
Take out the 2 truss screws and remove the Lower Lid in front of the Front Cabinet.
Take out the 4 truss screws and
remove the Side Lid on the side of
the Front Cabinet. In this instance,
remove the Side Lid that lets the
communication cable pass.
Depending on the number and
arrangement of the interconnected
game machines, you may remove
either or both of the two Side Lids.
SIDE LID
TRUSS SCREW (4),black
M4 X 16
PHOTO 20. 2 a
Be sure to secure space in excess of
70cm between machines.
DISTANCE BETWEEN MACHINES
1
2
3
4
5