Sega WaveRunner GP - Manual (Page 46)

www.seuservice.com 37
SERVICE MANUAL
9-3d
9-3b
9-3c
SERVICE MANUAL
SERVICE MANUAL
SERVICE MANUAL
9-3d, e
9-3b
9-3c
SERVICE MANUAL
9-3e
11,12
SERVICE MANUAL
14
SERVICE MANUAL
SERVICE MANUAL
SERVICE MANUAL
9-3h
TABLE 10 EXPLANATION OF TEST MODE
INSTALLATION
OF MACHINE
MEMORY
PERIODIC
SERVICING
CONTROL
SYSTEM
MONITOR
IC BOARD
DATA CHECK
When the machine is installed, perform the following:
1. Check to see that each setting is as per standard setting made at
the time of shipment.
2. In the INPUT TEST mode, check such input devices as each
SW, V.R., etc.
3. In the OUTPUT TEST mode, check such output devices as
lamps, motors, etc.
4. In the self-test mode, check ICs on the IC Board.
Choose the board test item in the MENU mode to allow the self-
test to be performed. In this test, PROGRAM RAMs, ROMs, and
ICs on the IC Board are checked.
Periodically perform the following:
1. Self-Test
2. Ascertain each setting.
3. In the INPUT TEST mode, test the control device.
4. In the OUTPUT TEST mode, check such output devices as
lamps, motors, etc.
1. In the INPUT TEST mode, check such input devices as each
SW, V.R., etc.
2. Adjust or replace each SW and VR.
3. If the problem can not be solved yet, check the control's moves.
In the MONITOR ADJUSTMENT mode, check to see if the
PROJECTOR adjustment is appropriately made.
1. Self-Test
2. In the SOUND TEST mode, check the sound related ROMs.
Check such data as game play time and histogram to adjust the
difficulty level, etc.
ITEMS DESCRIPTION
REFERENCE
SECTIONS