Sega WaveRunner GP - Manual (Page 97)

www.seuservice.com 88
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R B G
PIC-ADJ
SET
P
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
CONTRAST
BRIGHTNESS
H.POSI
V.POSI
H.SIZE
V.SIZE
EXIT
BRIGHTNESS 128
. . . . . . . . . . . . . . . . . . . .
BRIGHTNESS 156
. . . . . . . . . . . . . . . . . . . .
WRITING
WRITING
ADJUST
SET
PIC-ADJ
PIC-ADJ
Press either or PIC - ADJ button.
The on-screen menu will have one
item in purple and 6 items in
white.
Choose BRIGHTNESS by using either or PIC
- ADJ button.
Have the BRIGHTNESS displayed
in purple.
When the selection of the
BRIGHTNESS adjustment mode
is decided, the adjustment data
scale bar appears on the screen.
Press the SET button (to decide selection).
Press the WRITING button (for storing and finish).
Make adjustment by using either or ADJUST
button.
When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure and press
the SET button.
To continue adjusting other menu items, repeat procedure ~ .
Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power
is turned off and the pre-adjustment status will remain when the power is turned on next time.
The WRITING display appears
and the adjustment data is stored.
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to obtain
the desired on-screen brightness
status.
ADJUSTING THE SCREEN BRIGHTNESS
Although the on-screen picture quality has been adjusted at the time of shipment from the
factory, readjustment can be made if desired. When the Game Board is replaced, readjustment
may be necessary. Changing the BRIGHTNESS causes the brightness of the on-screen images
of black portions to be changed.
1
2
3
4
5
2 4
2