Kodak 5500 - Manual (Page 104)

Chapter 9
Print Skewed or Slanted
Probable Cause 1
The paper is not properly loaded in the tray.
1 Remove the stack of paper from the main paper tray, and slide the paper guides to the outermost
position.
2 Remove the paper and check for wrinkles and tears.
3 Straighten the stack of paper against a flat surface, and reload it into the main paper tray.
4 Slide the paper-width and paper-length guides inward until they stop at the edges of the paper.
See Also: Load Main Tray
Probable Cause 2
More than one type of paper is loaded.
Load only one type of paper.
Print Spotted
Paper may be dirty.
Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray, and
load new paper.
NOTE: Keep paper tray covers closed to keep dust and debris from collecting on the paper or inside the
printer.
Print Too Dark
„ Try re-taking the picture with the flash on, or move within the flash range of the camera. See your
camera user’s guide for details.
„ Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera
user’s guide for details.
„ Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help
for details.
„ Make sure the printer is not placed in direct sunlight or is not operating in a high-temperature
environment.
Print Too Light
IMPORTANT: For best results, use only Kodak Ink cartridges and paper for your printer.
„ Make sure the paper is loaded with the Kodak logo facing up. Reload if necessary.
„ Try re-taking the picture with the flash off. See your camera user’s guide for details.
„ Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera
user’s guide for details.
„ Edit the picture using Kodak EasyShare software on your computer. See the EasyShare software Help
for details.
100 Kodak EasyShare 5500 AiO