Kodak 5500 - Manual (Page 30)

Chapter 2
Your All-in-One will not be able to distinguish between fax and voice calls with this connection. Therefore
you will need to answer faxes manually.
When you receive a fax call, press Fax. The EasyShare AiO will answer the call and display Printing
Incoming Fax.
Fax Line with Modem
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you have a fax line on
which you receive no voice calls, and you also have a modem connected on this line.
NOTE: Since your modem shares the telephone line with your EasyShare AiO, you will not be able to use
both your computer modem and fax simultaneously. For example, while you are sending and
receiving faxes, you will not be able to Email or access the Internet.
1 Disconnect the phone cord from the wall jack that connects your modem to the telephone wall jack and
plug it into the port labeled 2-EXT on your All-in-One.
2 Connect the phone cord supplied with your All-in-One to your telephone wall jack and the port labeled
1-LINE.
3 Set Answering Machine Mode on your All-in-One to On.
4 If your modem software is set to automatically receive faxes to your computer, set it to Off.
When the phone rings, your EasyShare AiO will answer automatically after the number of rings you set in
the Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive
the fax.
26 Kodak EasyShare 5500 AiO