Kodak 5500 - Manual (Page 13)

Product Overview
Default Display Settings
Default settings are provided for each option. If you make changes to the settings, the changes remain as
long as you do not change modes. You can save the settings in each mode by navigating to Save Settings
and pressing OK. You may reset options to the master defaults by going to the main menu and selecting
Reset All Settings.
Photos
The LCD screen displays JPG images when you insert a memory card, camera, or USB device. However,
the following images will not be displayed.
„ File size greater than 8 MB
„ Image size greater than 12 megapixels
„ Image colorspace is not sRGB or adobeRGB
„ Progressive JPEG images
Memory Card Slots and USB Port
Your Kodak EasyShare All-in-One can access the memory cards used in most digital cameras. You can
insert the memory card into the EasyShare AiO, or connect your camera directly through one of the two
USB ports on the front panel, using a USB cable. Your Kodak EasyShare AiO can read the contents of the
memory card while it is still in the camera.
If your EasyShare AiO beeps three times when you plug a device into the USB Port, it means the device is
not supported.
Supported Memory Cards
Your Kodak EasyShare AiO can read the following memory cards.
„ xD-Picture Card
„ Memory Stick
„ Memory Stick Pro
„ Secure Digital Card/MultiMediaCard
„ Compact Flash type I and type II, including microdrives
User’s Guide 9