Kodak 5500 - Manual (Page 29)

Getting Started
NOTE: If you have problems when connected to the fax/phone port of your ISDN converter, try using the
port designated for multiple purposes (might be labeled “multi-combi” or something similar).
Separate Fax Line (no voice)
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you have a separate fax
line on which you receive no voice calls, and you have no other equipment connected on this phone line.
1 Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
labeled 1-LINE.
2 Set Answering Machine Mode on your All-in-One to On.
When the phone rings, your EasyShare AiO will answer automatically after the number of rings you set in
the Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive
the fax.
Shared Voice/Fax Line
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you receive both voice
and fax calls at the same phone number, and you have no other equipment connected to this phone line.
1 Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
labeled 1-LINE.
2 Connect your phone to the port labeled 2-EXT on the back.
User’s Guide 25