Two-sided printing accessory – Kodak 5500 User Manual
Page 18
Chapter 2
4
Press down on the ink cartridge until you hear it snap into position.
5
Tear open the color ink cartridge bag at the notch and remove the ink cartridge.
6
Remove and discard the orange cap.
7
Insert the color ink cartridge into the printhead.
8
Press down firmly on the cartridge until you hear it snap into position.
9
Close the printer access door.
NOTE: For the best quality prints, store ink cartridges in a location where the temperature does not
exceed 85° F (30° C).
Two-sided Printing Accessory
The Kodak EasyShare AiO supports an optional Two-sided Printing Accessory that enables printing on
both sides of the paper. When installed, the Two-sided Printing Accessory is automatically detected by the
printer and computer system software.
The Two-sided Printing Accessory is limited to plain paper (no photo paper). The paper dimensions that
can be used are from 6.9 to 8.5 inches (17.5 to 21.6 cm) wide and from 9.8 to 11.7 inches (24.9 to 29.7 cm)
long.
14
Kodak EasyShare 5500 AiO