Konica Minolta 5430 DL 5440 DL 5450 - Manual (Page 133)

Fusing Section Main Unit Theory of Operation
2-96
II Comp
osition
/O
p
eration
16. Fusing Section
16.1 Composition
Key Name Function/system
[1]
Exit Sensor (PC8) • Detects the media conveyed from the Fusing Pressure
Roller and Fusing Belt
[2]
Fusing Pressure Roller Pressure
Selector Dial • Used to select the pressure of the Fusing Pressure
Roller in two steps (normal mode and envelope mode)
[3] Upper Paper Separator Claw • Separates the media from the roller
• Prevent the media from winding around the roller
[4] Lower Paper Separator Claw
[5]
Fusing Pressure Roller Thermistor
(TH2) • Controls the temperature of the Fusing Pressure
Roller
• Non-contact type
[6]
Fusing Pressure Roller Heater Lamp
(H2) • Heats the Fusing Pressure Roller
• Prevents the surface temperature of the Fusing Belt
from being decreased
• Heater lamp: 300 W
4138to2067c2
4138to2066c0
4138to2065c0
[1]
[2]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[14]
[15]
[16]
[19]
[18]
[17]
[5]
[13]
[3]
[4]
[20]
5430DL_5440DL_5450_TO_PDF.book 96 ページ ２００５年４月１２日 火曜日 午後４時４９分