Konica Minolta 5430 DL 5440 DL 5450 - Manual (Page 88)

Main Unit Theory of Operation 2nd Transfer Section
2-51
II Comp
osition
/O
p
eration
9.2.2 2nd Transfer Roller pressure position deviation preventive mechanism
• When the Right Door is opened and closed, the Pressure Cam is rotated to prevent the
2nd Transfer Roller from deviating from the pressure position.
A. Operation
• The lever moves up or down as the Right Door is opened or closed, thereby locking rota-
tion of the coupling gear that drives the Pressure Cam.
9.2.3 2nd transfer voltage control
• The transfer voltage (T2) is applied to the 2nd Transfer Roller in order to transfer the
toner image from the Transfer Belt to the media.
• The transfer voltage (T2) is applied after the 2nd Transfer Roller has been pressed
against the Transfer Belt.
When the Right Door is closed When the Right Door is opened
Right Door open/
close lever
Pressure Cam
5430DL_5440DL_5450_TO_PDF.book 51 ページ ２００５年４月１２日 火曜日 午後４時４９分