Mechanical operations, 1 reversing mechanism, 1 reversing operation – Konica Minolta 5430 DL 5440 DL 5450 User Manual
Page 187: 2 paper exit roller drive coupling mechanism, 3 reverse motor control, Mechanical operations -4, Reversing mechanism -4, Reversing operation -4, Paper exit roller drive coupling mechanism -4, Reverse motor control -4
Mechanical Operations
Duplex Option Theory of Operation
2-4
II Comp
osition
/O
p
eration
4.
Mechanical Operations
4.1
Reversing mechanism
4.1.1
Reversing operation
• The 1-sided printed page is subjected to a reversing operation performed by the Exit
Roller in the machine and conveyed into the Duplex Option.
4.1.2
Paper exit roller drive coupling mechanism
• When the Duplex Option is mounted, the leading edge of the Duplex Option Lever raises
the Idle Lever, thus disconnecting the drive from the machine. The Exit Roller is driven by
the Duplex Reverse Motor.
4.1.3
Reverse Motor Control
• The signal output from the Duplex Board is used to control rotation of the Duplex
Reverse Motor.
Conveyed into the Duplex Option
Exit Roller
Exit Roller
Idle Lever
Duplex Reverse
Motor (M2 DU)
Duplex Option Lever
5430DL_5440DL_5450_TO_PDF.book 4 ページ ２００５年４月１２日 火曜日 午後４時４９分