KTI Networks NS-32LB451A11 - Manual (Page 28)

22
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Turning your
TV/Blu-ray combo on for the
first time
The first time you turn on your TV/Blu-ray combo,
the Setup Wizard screen opens. The Setup Wizard
guides you through setting up basic settings
including the menu language, time mode, picture
mode, and TV signal source.
To set up your TV/Blu-ray combo:
1 Make sure that you have inserted the batteries
in the remote control, connected your devices
to the TV/Blu-ray combo, and connected the
power cord.
2 Press (power), then wait several seconds. The
Choose Your Menu Language screen opens (only
the first time you turn on your TV/Blu-ray
combo).
3 Press or to highlight English, Français, or
Español, then press ENTER. The Choose Your
Time Setting screen opens with Mode
highlighted.
4 Press or to highlight an option, then press
or to adjust the option. You can select:
• Mode—You can select Auto or Manual. If you
select Auto, the date and time are set based
on a time signal received from a digital TV
channel. If you select Manual, you can adjust
the date and time.
• Time Zone—You can select the time zone.
• Daylight Savings—You can select On or Off.
• Year—Press or to select the current year.
• Month—Press or to select the current
month.
• Day—Press or to select the current day.
• Time—When Time is highlighted, press
or to move the cursor from field to field,
then press or to change the value in the
field.
5 Press ENTER. The Choose Your Picture Mode
screen opens.
6 Press or to highlight Home Mode or Retail
Mode, then press ENTER. If you selected Home
Mode (default selection with the same settings
as the Energy Savings picture mode), the
Choose Your TV Source screen opens. If you
selected Retail Mode (selection has the same
settings as the Vivid picture mode), the warning
“If you select Retail Mode, then Energy Saving is
not realized.”
If you select No, then press ENTER, the Choose
Your Picture Mode screen reopens. Go back to
Step 5.
If you select Yes, then press ENTER, the Choose
Your TV Source screen opens.
7 Press or to highlight Antenna, Cable, or
Cable/Satellite Box, depending on the type of
connection you have, then press ENTER.
• If you are using an antenna for a standard or
HD TV signal, select Antenna.
• If your cable TV is connected directly to your
TV/Blu-ray combo (without a box), select
Cable.
• If your cable is connected to your TV/Blu-ray
combo through a cable or satellite box, select
Cable/Satellite Box.