KTI Networks NS-32LB451A11 - Manual (Page 37)

31
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
4 Press or to select the channel you want to
label, then press . A small keyboard opens with
the channel label in the text entry area.
5 Press or to highlight a letter, number, or
character, then press ENTER to put your
selection in the text entry area. Repeat this step
to add additional letters. You can add as many as
seven letters.
6 Press or to highlight Enter on the
keyboard, then press ENTER, The new label will
appear in the Channel Label submenu and in
the Channel List.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To check the digital signal strength:
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
2 Press or to select CHANNELS. The
CHANNELS menu opens.
3 Press to highlight Channel Strength, then
press or ENTER to open the digital TV signal
strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting TV parental controls
Your TV/Blu-ray combo has a V-chip that lets you
control the type of programs your children can
watch. Parental controls include two ratings: MPAA
(based on age) and TV Parental Guidelines (based
on content and age). A TV program may have an
MPAA or TV Parental Guidelines rating, so you
should set control for both ratings.
Before you can select ratings, you need to set up a
parental controls password.
Setting or changing the password
To set or change the password:
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.