KTI Networks NS-32LB451A11 - Manual (Page 35)

29
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
4 Press or to highlight Antenna, Cable, or
Cable/Satellite Box, depending on the type of
connection you have, then press ENTER.
• If you are using an antenna for a standard or
HDTV signal, select Antenna.
• If your cable TV is connected directly to your
TV/Blu-ray combo (without a box), select
Cable.
• If your cable is connected to your TV/Blu-ray
combo through a cable or satellite box, select
Cable/Satellite Box.
If you selected Antenna or Cable, your
TV/Blu-ray combo automatically scans for
available channels in your area and stores the
channel information in the channel list. This may
take several minutes. While scanning, your
TV/Blu-ray combo displays a progress bar.
Hiding channels
You can hide channels in the channel list. When you
press CH
/CH , your TV/Blu-ray combo will skip
the hidden channels. You can still tune to a hidden
channel by pressing the number buttons for the
channel.
To hide channels:
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
2 Press or to select CHANNELS. The
CHANNELS menu opens.
3 Press to highlight Add/Skip Channels, then
press or ENTER to access the channel list
screen.
4 Press or to highlight the channel you want
to hide, then press ENTER to uncheck the
highlighted channel. You can add a channel to
the list by highlighting a channel and checking
it.
5 Repeat Step 4 to hide additional channels.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting up a favorite channel list
You can create a Favorites list so you can quickly
browse through your favorite channels by pressing
FAV, then selecting a channel from the Favorites list.
To set up a favorite channel list:
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
Notes
• During auto scan, digital channels will be
scanned first, then analog channels. When all
available digital channels have been found, the
message will ask you “Do you want to continue
scanning analog channel?” You can select No,
then press ENTER to exit the analog channel
scan, or let your TV/Blu-ray combo continue
scanning.
• You can press MENU or EXIT at any time to stop
the auto scan, but you will need to run the auto
scan again to create a channel list.