KTI Networks NS-32LB451A11 - Manual (Page 33)

27
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
4 Press or to highlight a setting, then press
or ENTER to access the options for the
setting.You can select:
• Auto Adjust—Automatically adjust the
computer image for the best picture. When
this option is selected, press or ENTER.
• H. Position—Adjusts the horizontal position
of the computer image.
• V. Position—Adjusts the vertical position of
the computer image.
• Clock—Adjusts the clock, to eliminate vertical
bars or stripes on the picture background.
• Phase—Adjusts the phase, after the
frequency has been set, to optimize the
picture.
5 Press or to adjust the option, or press or
to select a setting.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
2 Press or to select AUDIO. The AUDIO menu
opens.
3 Press to access the AUDIO menu.
4 Press or to highlight a setting, then press
or ENTER to access the options for the setting.
You can select:
• Audyssey Dynamic Volume—Selects the
Audyssey mode. You can select Off, Light,
Medium, or Heavy. When the Audyssey mode
is set to Light, Medium, or Heavy, your
TV/Blu-ray combo automatically adjusts the
volume to keep the volume level consistent.
• SRS TruSurround HD™—Provides the
ultimate home theater sound solution. You
can select On or Off.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the
left and right audio channels.
• Advanced Audio—Opens the Advanced
Audio menu where you can adjust additional
audio settings. Press or ENTER to access the
Advanced Audio settings.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to select to output audio in
2-channel stereo), or RAW (to pass through
the original digital audio sound).
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• Mono—Select this option if there is
noise or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Speakers—Selects the internal speakers
or external speakers (line out).
• Reset Audio Settings— Reset all audio
settings to factory defaults.
5 Press or to adjust the option, or press or
to select a setting.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Note
If you set the SRS TruSurround HD™ to On,
Audyssey Dynamic Volume is set to Off
automatically.