Kodak I1400 - Manual (Page 10)

A-61550 May 2007 5
2 Getting Started
What’s in the box
Before you begin open the box and check the contents:
• Kodak i1410, i1420 or i1440 Scanner
• Input tray
• Output tray
• USB 2.0 cable
• Power supply
• AC power cord bundles
• Welcome Folio which includes:
- Bundled installation and application CDs
- Registration sheets
- Printed User’s Guide, English
- Service Contact sheets
- Quick Installation Guide
- Quick Tips Guide
- Miscellaneous flyers
System requirements
Following is the recommended system configuration to run Kodak i1400
Series Scanners.
• Intel Pentium IV, 3.5 GHz processor
• USB port 2.0
• Windows 2000, Service Pack 4 and Windows XP (Professional/
Home), Service Pack 2; Windows Vista
• 200 MB free hard disk space
• 3 GB of RAM
Installing the scanner
Install the scanner in the following order:
1. Attach the input and output trays.
2. Install the Kodak Driver Software.
3. Connect the power cord to the scanner.
4. Connect the USB cable between your scanner and PC.
5. Turn on scanner power and finalize the Kodak Driver Software
installation.
6. Install other supplied applications (optional).
IMPORTANT: Install the Kodak Driver Software on the host PC
before you connect the scanner.