Kodak I1400 - Manual (Page 89)

84 A-61550 May 2007
Device - General tab The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper Source
NOTE: Flatbed options are only available if your scanner is equipped
with the Kodak i1400 Series A3 Flatbed Accessory.
• Automatic: looks for paper in the document feeder first. If there are
no documents in the input tray, the scanner will scan from the flatbed.
• Document Feeder: scanner will only scan documents from the input
tray.
• Flatbed: scanner will scan from the flatbed.
Power Saver — allows you to set the amount of time the scanner has
to be inactive before going into power saver mode. You can turn this
option off or set a time from 5 to 240 minutes.
Document Feeder
• Timeout: allows you to select the amount of time the scanner will
wait once the last document enters the feeder before the timeout
occurs. You can set a time from 1 to 300 seconds.
• Action when timeout occurs: indicates the action that will be taken
when the document feeder timeout has been reached.
- Stop Scanning: scanning will stop and control will return to the
scanning application (i.e. ends the job).