Kodak I1400 - Manual (Page 17)

12 A-61550 May 2007
Installing application
software The following Kodak applications are available on the CDs packed with
your scanner.
• Kodak Capture Software Lite
• Kodak Scan Validation Tool
Other scanning applications may also be provided on the CDs packed
with your scanner. Review these CDs for any other applications that are
included. You may also use third-party scanning applications not
provided. See the User Guides provided with these applications for
instructions on how to install and use the software.
Scanner components
Front view
1 Scanner cover — provides access to the internal components of
the scanner.
2 Output tray — collects the scanned documents.
3 LEDs — illuminates or flashes indicating scanner status.
4 Scanner cover release lever — push up on this lever to open the
scanner cover.
5 Input tray — holds up to 100 documents (20 lb./75 g/m
2
) in place.
6 Input tray extender — pull this extender out when scanning
documents longer than 21.6 x 27.9 cm (8.5 x 11 inches).
7 Gap release lever — push up on this lever to adjust the space
between the feed module and separator module for documents
that require special handling.
1
2
3
4
5 6
7