Kodak I1400 - Manual (Page 115)

110 A-61550 May 2007
• Apply to:
- Predominant - smooths the predominant background color to
white.
- Neutral - smooths only the neutral color to white, and also smooths
up to two additional background colors.
- All - smooths the neutral color and up to two additional background
colors to white.
NOTE: The Apply to options are only available for Method: Change
to White.
• Aggressiveness: allows you to adjust the extent at which the
background(s) are determined. The values range from -10 to 10. The
default is 0.
Image Edge Fill — fills the edges of the final electronic image by
covering the area with the specified color. Image Edge Fill is performed
after all other image processing options have been applied.
Frame Mode — fills in an equal amount of the selected color from the
Image Edge Fill drop-down list on all sides of the image, or you can
select a value in the Top, Left, Right and/or Bottom area(s) from each
side of the scanned image to be filled.
When using this option, be careful not to enter a value too large as it
could fill in image data that you want to keep.