Kodak I1400 - Manual (Page 7)

2 A-61550 May 2007
Safety information
• When placing the scanner, make sure that the electrical power outlet
is located within 1.52 meters (5 feet) of the scanner and is easily
accessible.
• Use only the power supply that was provided with the Kodak i1400
Series Scanner. Do not substitute another power supply model or
another manufacturer’s power supply.
• This product is designed for connection to IT power systems.
• The printer access door must be in place and closed during scanner
operation, except when changing the print head location or replacing
the ink cartridge. When the printer access door is removed, do not
allow loose clothing, jewelry, hair or other objects to enter the printer
opening.
• Material Safety Data Sheets (MSDS) for chemical products are
available on the Kodak website at: www.kodak.com/go/msds. When
accessing the MSDSs from the website, you will be required to
provide the catalog number of the consumable you want the Material
Safety Data Sheet for. See the section entitled, “Supplies and
consumables” later in this guide for supplies and catalog numbers.
Warning labels
User precautions Users and their employer need to observe the common sense
precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
• Do not wear loose clothing, unbuttoned sleeves, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair length should be kept short, using a hair net if needed, or tying
long hair up in a bundle.
• Remove all other loose objects from the area that could be drawn into
the machine.
• Take sufficient breaks to maintain mental alertness.
• Use only the recommended cleaning supplies.
• Do not use canned/compressed air.
Supervisors should review their practices and make compliance with
these precautions a part of the job description for operation of the
scanner or any mechanical device.
CAUTION: Moving parts, avoid contact.
CAUTION: Hot surface, avoid contact.