Kodak I1400 - Manual (Page 118)

A-61550 May 2007 113
Scan Area dialog box
The Scan Area dialog box allows you to define the amount of image
data which is returned to the host. The area can be defined in Pixels,
Inches or Centimeters.
NOTE: Select the side and image to be defined by highlighting Front
Image #1, Front Image #2, etc. based on the cropping option
selected for each of these in the main ISIS Driver window. The
scan areas defined for all camera selections are independent.
To access the Scan Area dialog box, select Scan Area on the Layout
tab.
NOTE: The Scan Area dialog box is only available when Fixed to
Transport or Relative to Document is selected on the Scanner
Settings dialog box.