Cleaning the drive rollers and transport area – Kodak I1400 User Manual
Page 137
Advertising
132
A-61550 May 2007
Cleaning the drive rollers
and transport area
1. Manually rotate and wipe the drive rollers with a roller cleaning pad.
2. Clean any dust or debris in the slots around the drive rollers.
3. Wipe the upper and lower transport areas with a roller cleaning pad.
4. Dry the transport area with a dry Staticide Wipe.
5. Push against the raised edge on the left side of the rear roller cover
and pull the cover up and out to remove it.
6. Remove any dust or debris under the rear drive roller cover.
7. Reinstall the rear drive roller cover.
Advertising