Changing image settings – Kodak I1400 User Manual

Page 85

Advertising
background image

80

A-61550 May 2007

Changing Image
Settings

1. Select a Setting Shortcut from the main Kodak Scanner window that

closely describes your desired output.

2. Select an Input document is option from the main Kodak Scanner

window.

3. Select Settings to display the Image Settings window.

4. Before making any adjustments, browse through the tabs on the

Image Settings window to get familiar with options that are
available.

5. For each option you want to use, make the appropriate selections

you want the scanner to perform when scanning.

6. If you want to see the result of your options:

• Place a representative document in the input tray of the scanner.

• Select Preview to perform a preview scan.

NOTE: If the images are not acceptable, you can either select a

different Setting Shortcut or continue working with the
current Setting Shortcut by reviewing each tab within the
Image Settings window again. Repeat this step as needed.

7. When finished, select Home to return to the main Kodak Scanner

window and then select Save to save your selections to the
shortcut.

Advertising