Kodak I1400 - Manual (Page 25)

20 A-61550 May 2007
The main Kodak Scanner window will be displayed.
5. Select the Default Setting Shortcut.
6. Click OK. This resets the software to the factory-installed default
settings. The factory default settings are set to capture black and
white images. For an i1410 Scanner one side of the document will
be scanned. For an i1420 or i1440 Scanner both sides of the
document will be scanned. The Scan Validation Tool screen will be
displayed.
7. Place some test documents into the input tray of the scanner. If you
are scanning one-sided documents or if you have a Kodak i1410
Scanner, be sure the side you want to scan is facing the input tray.
8. Click the Start Scanning icon on the Scan Validation Tool.