Konica Minolta BIZHUB 210 - Manual (Page 118)

4 Making copies
4-14 bizhub 162/210
Positioning books on the original glass
When copying an open book or magazine, position the original as detailed
below.
1
Raise the document feeder or original cover.
7 WARNING
Broken original glass by incorrect handling.
%
Do not place books weighing more than 3 kg on the original glass. In
addition, do not press down extremely hard on the original, otherwise
the machine may be damaged.
2
Position the book face down onto the
original glass, with the top of the
book toward the rear of the machine
and with the center of the book
aligned with the
mark in the
document scale.
3
Gently lower the document feeder or
original cover.
4
Press the [Book separation] key.
The book separation indicator lights
up
5
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
6
Press the [Start] key.
This will start the copy cycle.