Konica Minolta BIZHUB 210 - Manual (Page 230)

8 When a message appears
8-20 bizhub 162/210
PC PRINT
MEMORY FULL The image data received from
the computer has exceeded
the capacity of the memory. Press any key, or turn the ma-
chine off, then on again. (The
received image data should be
cleared from the memory.)
SET PLUG-IN COUNTER A counter key is not inserted. Insert the counter key.
UPPER TRAY FULL If the optional job separator is
installed and the paper in the
upper copy tray has reached
the maximum capacity, print-
ing cannot continue. Remove all paper from the up-
per copy tray of the job sepa-
rator.
(Flashing alternately)
REMOVE PAPER
TRAY MOVEMENT ERROR The optional job separator is
installed and the paper in ei-
ther the upper copy tray or the
lower copy tray has reached
the maximum capacity when
the machine is turned on,
when copying begins, or when
starting to print. Remove the paper from the
upper copy tray or the lower
copy tray of the job separator,
and then press any key.
(Flashing alternately)
PRESS ANY KEY
CALL SERVICE(M1) A maintenance is due. Contact your service repre-
sentative.
CALL SERVICE(M2) The imaging unit should be re-
placed. Contact your service repre-
sentative.
MACHINE TROUBLE Some problem occurred in the
machine. Turn the machine off, then on
again.
If the error is still displayed,
contact your service repre-
sentative.
(Flashing alternately)
(C####)
Message Cause Remedy