Konica Minolta BIZHUB 210 - Manual (Page 130)

5 Useful operations
5-4 bizhub 162/210
3
Check the setting for the size of pa-
per to be printed on.
– If AUTO is displayed, check that
A4-sized paper is loaded into the
paper tray.
– If AUTO is not displayed, press
the [Paper] key until AUTO is displayed.
– For details on changing the paper size setting for the paper tray, re-
fer to “Paper source settings” on page 7-12.
4
Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
5
Press the [Start] key.
This will start the copy cycle.
2
Note
When making copies using the manual bypass, continue loading paper
into the tray.