Konica Minolta BIZHUB 210 - Manual (Page 197)

Using the utility mode 7
bizhub 162/210 7-29
7.5 Copy settings
When the machine is turned on or the [Panel reset] key is pressed, the ma-
chine is automatically reset to its default settings. By changing the default
settings, you can change the initial mode. Refer to the following tables for the
default settings for each function.
COPY SETTING 1 menu
No. Name Description
1 PAPER PRIORITY This function can be used to specify the tray that should be given
priority when the AUTO Zoom setting is selected.
• Default setting: 1ST
2 DENSITY PRIORITY This function can be used to set the density to TEXT, PHOTO or
TEXT/P when the machine is turned off or the [Panel Reset] key is
pressed.
• Default setting: TEXT/P
3 DENSITY LEVEL(A) This function can be used to set the density level of the AUTO
Density setting to one of the three settings between LIGHT and
DARK.
• Default setting:
4 DENSITY LEVEL(M) This function can be used to set the density level of the manual
density setting to one of the nine settings between LIGHT and
DARK.
• Default setting:
5 BINDING POS. This function can be used to set whether the first page of a book
to be scanned is on the left (left-bound) or on the right (right-
bound).
• Default setting: LEFT
6 MARGIN SETTING This function can be used to specify the width of the binding area
(margin) between 0 mm and 20 mm (in units of 1 mm) when cop-
ying documents to be bound.
• Default setting: 10 mm
7 ERASE SETTING This function can be used to specify between 5 mm and 20 mm
(in units of 1 mm) the width that is erased when making copies
with the erase function set to LEFT, UPPER or FRAME.
• Default setting: LEFT, UPPER and FRAME erase settings is 10
mm.
8 SMALL ORIGINAL This function is used to specify whether or not copying is possible
after loading a small document whose size cannot be automati-
cally detected.
• Default setting: is ENABLE.