7 programmed copy jobs, To store a copy program, Programmed copy jobs -22 – Konica Minolta BIZHUB 210 User Manual
Page 166: To store a copy program -22
6
Advanced copy operations
6-22
bizhub 162/210
6.7
Programmed copy jobs
Store up to two of the more frequently used copy setting programs for im-
mediate recall when necessary.
2
Note
Copy programs cannot be stored while the machine is warming up or
while a copy job is paused (Interrupt mode).
To store a copy program
1
Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
–
The zoom ratio can be set between × 0.50 and × 2.00.
2
Press the [Copy program] key.
3
Press the [
*] and [)] keys to select
REGIST.
.
4
Press the [Yes] key.
5
Using the [
*] and [)] keys, select the
program number where you wish to
store the copy program.
6
Press the [Yes] key.
This will start the copy cycle.
2
Note
If two copy programs have already been stored, the copy settings previ-
ously stored under the selected program number are deleted and re-
placed with the new ones.