Logical Solutions Secure Console Servers SCS-R - Manual (Page 21)

tel (203) 647-8700 Page 21 Product Manual - MAN-000001C
Mounting the SCS S
ECURE
C
ONSOLE
S
ERVERS
3 Installation
Place it in your Rack. Connect the Cat5 cables to the Ports. Plug it in.
3.1 Mounting the SCS
You may choose to rack mount your SCS unit(s) or place them on a shelf. The
front panel display should be visible and front panel buttons need only be accessible
for the initial setup of the system. All connections are made to the rear of the chassis.
3.1.1 Rack Mount or Desktop
The SCS products may be installed either in an EIA-standard 19-inch rack (1U tall)
or may be placed on a shelf or desktop. For shelf use, rubber feet are provided, and the
rack mount brackets may be removed. The SCS chassis does not need to be opened or
accessed. The sturdy metal case allows units to be stacked as required.
Note
Be sure to leave adequate ventilation room on both sides of the SCS
chassis, especially if units are being stacked.
The rack mount brackets are held on by 4 screws each. They may be positioned so
that the unit sits forward, flat or recessed in your rack. If the brackets removed or repo-
sitioned, it is not necessary to re-use the extra rack mount screws.