Logical Solutions Secure Console Servers SCS-R - Manual (Page 43)

tel (203) 647-8700 Page 43 Product Manual - MAN-000001C
Initial Sysadmin Access S
ECURE
C
ONSOLE
S
ERVERS
5.2.2 Log In as root
At the command prompt, type root to access the SCS as the root user. The
default password is root.
Note
The root user should change the default root password (use the
passwd command) as soon as possible to prevent undesired SCS
system access.
You will see the short Hostname (e.g., “scs”) in the root login (#) prompt.
Figure 5.2 SCS login display, showing root user logged in
5.2.3 Enter Commands
The system administrator enters Linux commands using the command-line inter-
face. Unless otherwise shown, commands are all lower-case and may have modifiers.
SCS commands are discussed in Section 6, Commands, beginning on page 47.
5.2.4 Log Out
To log out from a session, use the command logout. If logging out from a net-
work session, the Console Server will disconnect the ssh session.
Logical Solutions Inc Secure Console Server
Kernel xxxx
scs.localdomain login: root
Password:
[root@scs root]#