Logical Solutions Secure Console Servers SCS-R - Manual (Page 55)

tel (203) 647-8700 Page 55 Product Manual - MAN-000001C
Change Network Address S
ECURE
C
ONSOLE
S
ERVERS
Figure 7.1 Example of netconfig fill-in fields
When you have filled in the fields, arrow down to the OK button and press Enter
to accept your entries.
7.2.2 More Than One Nameserver
The netconfig command allows the user to set up one nameserver’s IP address.
It is possible to have multiple nameservers, which must be done outside of the
netconfig routine. The nameserver data is in the file /etc/resolv.conf .
If you want to have more than one nameserver, you must edit the file
/etc/resolv.conf
. For more information, refer to the MAN page for
resolv.conf .
In this file, you will find the IP address you entered with netconfig . You can
add more lines (maximum of 3 nameservers is allowed) to this file with the address of
additional nameservers.
The format of a line is: nameserver <IP address> .