Logical Solutions Secure Console Servers SCS-R - Manual (Page 74)

User Operations
SCS160 / SCS320 / SCS480 Page 74 www.thinklogical.com
SCS160R / SCS320R
9.3.6.1 Edit Escape Sequence
The User can edit the Escape command sequence, if necessary. The user only
change the escape sequence if it causes problems with the hardware or software used.
When logged in, a user can enter editesc to edit or view their preset ‘Escape’
sequence. The
escape
sequence (user key strokes, default is 'ESC - A') is presented
in its ASCII form (x1bA). If the user wishes to keep the existing sequence, they need
only to press <ENTER> to keep the existing setting.
Caution
It is generally best to have the sysadmin change the Escape
sequence, as there may have been an equipment change or other
issue that a remote user might not be aware of.