Logical Solutions Secure Console Servers SCS-R - Manual (Page 29)

tel (203) 647-8700 Page 29 Product Manual - MAN-000001C
Default Configuration S
ECURE
C
ONSOLE
S
ERVERS
4 Initial Configuration
It’s Pre-Configured. Set your IP Address. Just Add Users.
4.1 Default Configuration
Out of the box, the SCS is pre-configured, ready to generate ssh keys, and has an
IP address set to a generic default value of 10.9.8.7 / NetMask 255.0.0.0. It is likely
that the sysadmin will want to change from this default IP address to your local IP
information. The sysadmin will only need to add user information specific to his site.
Note
The default IP address of the SCS is 10.9.8.7, with a default subnet
mask of 255.0.0.0.
When you first connect the unit to your network and turn the power on, it will take
about two minutes for the SCS to perform the initial ssh host key generation. The front
panel display will show the following display after the SCS’s power-up is complete and
the system is ready.
Figure 4.1 SCS Front Panel Display, default, normal mode shown
The top line of the display is the SCS’s network and domain name, while the sec-
ond line is a clock display showing day and date (initially set to Eastern Time Zone).
scs.localdomainname
Tue Mar 18 15:53:03 2003