Lucent Technologies 6 - Manual (Page 10)

6 Issue 1 CRCS R6.0 April 1999
Pre-Installation Requirements
Remote Configurations
For remote configurations where the MCU and CRCS/OpCenter or OpCenter SP
are not collocated, modem pooling is used (see "Appendix A: Modem Pooling" on
page 44). The modems must support a minimum of 9600 baud. Additional serial
ports may be required which must support non-shared interrupts.
Login and Passwords
Be sure you know the following information:
n Login, password, dialed number and COM port for each MCU
n CRCS or OpCenterSP Serial Number
n Default administrator password and agent password
n PC login and password, if applicable
Fax Option
Refer to "Faxmodem Installation" on page 32 for hardware and software require-
ments for the optional fax feature.