Lucent Technologies 6 - Manual (Page 46)

42 Issue 1 CRCS R6.0 April 1999
Testing OpCenterSP
Testing OpCenterSP
OpCenterSP login names and their associated passwords are assigned by the
system administrator. The default logins, admin and agent, also have default
passwords (available from your Lucent representative) associated with them. If
you choose to keep the login names admin and agent, be sure to change the
default passwords for both of them for security reasons. However, any additional
logins you add do not require a password.
1. If the Login window is not already displayed, select Start—Lucent Tech-
nologies OpCenter—OpCenter.
2. From the OpCenterSP Login window, click Login.
3. Enter your login name and password.
4. Click OK.
5. From the Link Administration window, set up each MCU.
Figure 36. MCU Link Administration Window