Lucent Technologies 6 - Manual (Page 5)

Issue 1 CRCS R6.0 April 1999 1
Single-User
CRCS/OpCenter and
OpCenterSP Installation
Installation Overview
CRCS/OpCenter and OpCenterSP can be set up as a single-user system on a
dedicated PC connected to up to 2 Lucent Technologies MultiPoint Conferencing
Units (MCU). The CRCS/OpCenter PC can run either Microsoft® Windows NT
4.0 or Microsoft Windows 95.
The connection between the CRCS/OpCenter or the OpCenterSP PC and the
MCU can be local if the distance between the two is less than 5000 feet. The con-
nection is considered remote if the distance is greater than 5000 feet. Also, if the
CRCS/OpCenter or OpCenterSP PC is not connected to the TN754B or TN2224
on the MCU side, the connection is considered remote.
Follow the installation procedures outlined in this guide to set up and connect the
CRCS/OpCenter or the OpCenterSP PC to the MCU. This manual also includes
installation procedures for the fax option available with CRCS.